Aluminium Radiators & Engineering Pty Ltd
Unit 11 / 60 Kremzow Rd
Brendale QLD Australia

Ph +61 07 32054620 Email info@are.com.au

4x4 Air - Water Intercoolers

ARE pioneered commercial aftermarket air/water intercooling in Australia in the late '90's, so we know a thing or three about it ! Right from the start we strove for the
highest performance & quality possible, so our intercoolers are not cheap & our kits are expensive - but I consider them to be good value for what's in them & the results gained.
Our 'rectangular' intercoolers are much more versatile than a 'barrel', but unfortunately, much more expensive too produce. We can make them any size (within reason) & vary  the
fin pitch too suit each application.  At least they're both made in Australia & you have a choice !
We have made them too suit a 7 hp bike for Adelaide University, too dyno test cell test units for both Ford Australia & Prodrive, too Craig Munros 2000+ horsepower
Summernats winner !, so we must be able to make the very best unit for your 4x4.

  

 
1897rwhp - 2200+ hp
   
Chev 6.2L Landcruiser
 Started late'03 finished mid '04. Story here$38000 This is one of our Land-cruiser kits from '04 $4400 Many components & top results. It even has a 2speed timed pump controller. Kims Toyota surf '05   Our intercooler made a big difference to engine cooling & economy.. Steve Mains compound setup - mid '09.
           
           
           
           



ARE pioneered commercial aftermarket air/water intercooling in Australia in the late '90's, so we know a thing or three about it ! Right from the start we strove for the
highest performance & quality possible, so our intercoolers are not cheap & our kits are expensive - but I consider them to be good value for what's in them & the results gained.
Our 'rectangular' intercoolers are much more versatile than a 'barrel', but unfortunately, much more expensive too produce. We can make them any size (within reason) & vary  the
fin pitch too suit each application.  At least they're both made in Australia & you have a choice !
We have made them too suit a 7 hp bike for Adelaide University, too dyno test cell test units for both Ford Australia & Prodrive, too Craig Munros 2000+ horsepower
Summernats winner !, so we must be able to make the very best unit for your 4x4.

 

 


 
 

Currently A.R.E. is spending considerable R&D time on developing
our own range of 4 x 4  cooling products.
Check back for updates.

 

All information © 2004

 

 

© Aluminium Radiators and Engineering Pty Ltd (ARE Cooling)
 While every effort is made to ensure details and information is correct at time of publishing Sunday, 05 August 2012
please contact ARE by phone, fax or email to confirm prices before order
.